YAMAHA SP2060

Contact

An ideal match for the I-Series speakers, the SP2060 is a high-performance 2-in/6-out speaker processor with 96 kHz capability.

Outline		SP2060
I/O	Line inputs	2
	AD converter	24-bit; 64-time over sampling
	Line outputs	6
	DA converter	24bit; 64-time(@96kHz) / 128-time(@48kHz) over sampling
	Digital I/O	1x AES/EBU (2-in/2-out)
General specifications		SP2060
Internal processing		32bit
Sampling frequency rate	Internal	96kHz
Sampling frequency rate	External	44.1/48kHz (±0.1%), 88.2/96kHz (±0.1%)
Signal delay		Less than 761 micro sec
Total harmonic distortion		Less than 0.05% (20Hz-40kHz)
Frequency response		0, +0.5, -1.0dB 20Hz-40kHz
Dynamic range		DA: 110dB; AD+DA: 106dB
Hum & noise level	Residual output noise	-86dBu (Digital input), -82dBu (Analog input)
Crosstalk		-80 dB
Power requirements		AC100-240V 50/60Hz
Power consumption		30W
Dimensions	W	480mm; 18-7/8in
	H	44mm; 1-3/4in (1U)
	D	361mm; 14-1/4in
Net weight		9.3kg; 20.5lbs
Accessories		Owner’s manual, AC power cord, 4x Rubber foot

Terminal	Actual load impedance	For use with nominal	Level		Connector
Terminal	Actual load impedance	For use with nominal	Nominal	Max. before clip	Connector
Input A, B	10k ohms	600ohm Lines	+4dBu	+24dBu	XLR-3-31 type (Balanced)
Output 1 - 6	75ohms	600ohms Lines	+4dBu	+24dBu	XLR-3-32 type (Balanced)

Terminal	Format	Data length	Level	Connector
Digital Input AES/EBU	AES/EBU	24-bit	RS422	XLR-3-31 type (Balanced)