High Power 2-channel amplifier 2 x 4000 W in one rack unit Optional Ethernet Control
PERFORMANCE SPECIFICATIONS
Number of channels | 2 |
Output power (per channel) |
Single channel mode: 6000 W @ 2 Ω, 4000 W @ 4 Ω, 2000 W @ 8 Ω Bridge mode: 12000 W @ 4 Ω, 8000 W @ 8 Ω |
Max output voltage | 200 Vpeak |
Max output current | 125 Apeak |
AC Main Power | Power supply: universal, regulated switch mode with PFC (Power Factor Correction) Nominal power requirement: 100-240 V ±10%, 50-60 Hz Operating voltage: 90 V – 264 V |
Power consuption | Idle: 1.3 A @ 115 V, 1.17 A @ 230 V 1/8 of max output power @ 4 Ω: 12.2 A @ 115 V, 6.1 A @ 230 V 1/4 of max output power @ 4 Ω: 22.6 A @ 115 V, 11.3 A @ 230 V |
Gain | Selectable: 26 dB, 29 dB, 32 dB, 35 dB |
Frequency response | 20 Hz – 20 kHz (±0.5 dB) @ 1 W, 8 Ω |
S/N ratio | > 110 dB (20 Hz – 20 kHz, A-weighted) |
Crosstalk separation | > 66 dB @ 1kHz |
Input impedance | 10 kΩ balanced |
Slew rate | 50 V/μs @ 8 Ω, input filter bypassed |
PHYSICAL
Input connector | 2 x Combo Jack/XLR-F – Signal input |
Output connector | 2 x speakON – pins 1+ 2+ / 1- 2- paralleled |
Height | 45 mm – 1 3/4″ |
Width | 483 mm – 19″ |
Depth | 475 mm – 18 3/7″ |
Weight | 12 kg – 26.5 lb |
Contact
High Power 8-channel amplifier 8 x 3000 W in two Rack Units Integrated DSP and Ethernet, optional Dante
Contact
High Power 4-channel amplifier 4 x 3000 W in one Rack Unit Integrated DSP and Ethernet, optional Dante
Contact
High Power 2-channel amplifier 2 x 2600 W in one rack unit Optional Ethernet Control
Contact
4-channel amplifier 4 x 1250 W in one rack unit Perfect solution for mid-power systems
Contact
4-channel amplifier 4 x 700 W in one rack unit Perfect solution for mid-power systems